SYSTEM COMPONENTS


Fibrecoat resin system

Can sizes: 25kgs 10kgs

Surface primers

Tin sizes: 4kg 10kg

Reinforcement

225gm Fibreglass reinforcement mat

TOOLS & ANCILLARIES


Fibretrim profiles

Trims and corners available

Application tools

Fibrecoat uses standard brushes and rollers

Fibrecoat Solvent

Special cleaning solvent for use with application tools

Finishes

The system is available is Dark grey, light grey and black with other colours available on request.


Curing time

The curing times stated for Fibrecoat are approximate and are vary due to different onsite conditions like the percentage of relative humidity in the air or direct sunlight on the application area.

It is recommended that the user check the curing characteristics of a small quantity of Fibrecoat under actual operating conditions prior to use. For more information talk to one of technical services team.

Waterproof

Over coating

Touch dry

Full cure


Application

Due to Fibrecoat’s amazing flexibility and adhesion properties, it can be applied directly to a wide range of new and existing roof coverings. The system is perfect for use as part of a warm, cold, green or inverted roof design and is available in a range of colours and non-slip finishes for trafficked areas.

  • Dormers
  • Porches
  • Bays & conservatories
  • Extensions
  • Green roofs
  • Balconies
  • Garage roofs
  • Lead replacement


Thermal expansion

Fibrecoat has incredible flexibility and can withstand normal building movement and thermal expansion and contraction without the need for expansion joints on any surface area.

The Fibreflex technology enhances our products flexibility without adding any post production additives which can lead to long-term problems with the life cycle of the roof membrane.

Elongation at break


Substrates

Along with the standard plywood or OSB3 boards for new roof configurations, Fibrecoat can also be applied directly to existing roof coverings allows for low-cost refurbishments with minimum disturbance.

The range of system primers are required to seal the substrate and extend product coverage. Specified primers vary dependent upon substrate type & condition. Please refer to our substrate guide for a detailed overview on primers available.

  • Aluminium
  • Asbestos
  • Asphalt
  • Bitumen
  • Brickwork
  • Concrete
  • Corroded galvanising
  • Corroded mild steel

  • Felt
  • Galvanising
  • GRP
  • Insulation board
  • Lead
  • Mild steel
  • PVC single ply
  • Slate and tiles


Foot traffic

The Fibrecoat system is available with non-slip finishes for walkways and heavy foot traffic. A Non-slip finish should be specified for high traffic areas and provides perfect protection for normal use on terraces, balconies and walkways. While the surface finish in anti-slip it will not eliminate the risk of slipping, particularly in winter conditions where ice has formed.